Fall Semester 2012

  1. Engineering (ENGR)

  2. Course Number Course Name Credits
  3. A105A Engr Computer-Aided Design I 1.0
    1. Days Time Location Instructor Open Seats
    2.      F  01:30PM-5:20PM
      ENGR 218
      Foster, J 1

      CRN: 71610
      Section: 601
      Date Range: 08/27-09/28

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    3.   T R   05:30PM-7:10PM
      ENGR 218
      Foster, J 0

      CRN: 71611
      Section: 602
      Date Range: 08/27-09/28

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    4.        
      OFF CMPS
      Kosiek, K 5

      CRN: 80006
      Section: 944
      Date Range: 08/27-12/15

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    5.        
      OFF CMPS
      Roach, W 5

      CRN: 80006
      Section: 944
      Date Range: 08/27-12/15

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

  4. A105B Engr Computer-Aided Design II 1.0
    1. Days Time Location Instructor Open Seats
    2.      F  01:30PM-5:20PM
      ENGR 218
      Foster, J 4

      CRN: 71612
      Section: 601
      Date Range: 10/01-11/02

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    3.   T R   05:30PM-7:10PM
      ENGR 218
      Foster, J 3

      CRN: 71613
      Section: 602
      Date Range: 10/01-11/02

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    4.        
      OFF CMPS
      Kosiek, K 5

      CRN: 80311
      Section: 944
      Date Range: 08/27-12/15

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    5.        
      OFF CMPS
      Roach, W 5

      CRN: 80311
      Section: 944
      Date Range: 08/27-12/15

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

  5. A105C Engr Computer-Aided Design III 1.0
    1. Days Time Location Instructor Open Seats
    2.      F  01:30PM-5:20PM
      ENGR 218
      Foster, J 3

      CRN: 71614
      Section: 601
      Date Range: 11/05-12/07

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

      More Info

    3.   T R   05:30PM-7:10PM
      ENGR 218
      Foster, J 10

      CRN: 71615
      Section: 602
      Date Range: 11/05-12/07

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

      More Info

    4.        
      OFF CMPS
      Kosiek, K 5

      CRN: 80312
      Section: 944
      Date Range: 08/27-12/15

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

      More Info

    5.        
      OFF CMPS
      Roach, W 5

      CRN: 80312
      Section: 944
      Date Range: 08/27-12/15

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

      More Info

    Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

  6. A151 Introduction to Engineering 1.0
    1. Days Time Location Instructor Open Seats
    2.   T     08:30AM-9:20AM
      ARTS 150
      Peuker, S 51

      CRN: 71616
      Section: 601
      Date Range: 08/27-12/09

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    3.        
      OFF CMPS
      Kosiek, K 5

      CRN: 80007
      Section: 944
      Date Range: 08/27-12/15

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    4.        
      OFF CMPS
      Roach, W 5

      CRN: 80007
      Section: 944
      Date Range: 08/27-12/15

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    5.  M W    10:00AM-11:15AM
      GOOD 130
      Rohl, E 14

      CRN: 78624
      Section: I10
      Date Range: 09/24-10/29

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    6.     R   05:30PM-6:30PM
      JKB 122
      Haan, S 1

      CRN: 77945
      Section: P31
      Date Range: 08/27-12/15

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

  7. A161 Engineering Practices II 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    01:00PM-2:15PM
      RH 117
      Peuker, J 4

      CRN: 71619
      Section: 601
      Date Range: 08/27-12/09

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    3.   T R   08:30AM-9:45AM
      RH 110
      Peuker, J 25

      CRN: 71620
      Section: 602
      Date Range: 08/27-12/09

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    4.   T R   01:00PM-2:15PM
      RH 111
      Peuker, J 8

      CRN: 76966
      Section: 603
      Date Range: 08/27-12/09

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    5.        
      OFF CMPS
      Kosiek, K 5

      CRN: 80008
      Section: 944
      Date Range: 08/27-12/15

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    6.        
      OFF CMPS
      Roach, W 5

      CRN: 80008
      Section: 944
      Date Range: 08/27-12/15

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

  8. A495 Engineering Internship 1.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Hoffman, J 15

      CRN: 71624
      Section: 601
      Date Range: 08/27-12/15

      Professional work experience designed to provide students with the opportunity to investigate the practical applications of engineering design within engineering organizations. Assignments and projects arranged with cooperating organizations and agencies.
      Registration Restrictions: Instructor permission.

      More Info

    Professional work experience designed to provide students with the opportunity to investigate the practical applications of engineering design within engineering organizations. Assignments and projects arranged with cooperating organizations and agencies.
    Registration Restrictions: Instructor permission.

  9. Engineering Science (ES)

  10. Course Number Course Name Credits
  11. A103 Engineering Graphics 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    05:30PM-6:20PM
      ENGR 218
      Varney, T 7

      CRN: 71632
      Section: 601
      Date Range: 08/27-12/15

      Introduces the fundamentals of engineering graphics and provides training in visualization skills necessary for graphically presenting of engineering ideas using standard drawing techniques and Computer Aided Design (CAD).

      More Info

    3.   T R   04:00PM-4:50PM
      ENGR 228
      Dodge, D 11

      CRN: 71633
      Section: 602
      Date Range: 08/27-12/15

      Introduces the fundamentals of engineering graphics and provides training in visualization skills necessary for graphically presenting of engineering ideas using standard drawing techniques and Computer Aided Design (CAD).

      More Info

    Introduces the fundamentals of engineering graphics and provides training in visualization skills necessary for graphically presenting of engineering ideas using standard drawing techniques and Computer Aided Design (CAD).

  12. A103L Engineering Graphics Lab 0.0
    1. Days Time Location Instructor Open Seats
    2.  M W    06:30PM-8:10PM
      ENGR 218
      Varney, T 7

      CRN: 71634
      Section: 603
      Date Range: 08/27-12/15

      More Info

    3.   T R   05:00PM-6:40PM
      ENGR 228
      Dodge, D 11

      CRN: 71635
      Section: 604
      Date Range: 08/27-12/15

      More Info

  13. A208 Engr Statics & Dynamics 5.0
    1. Days Time Location Instructor Open Seats
    2.  M WR   08:00AM-9:40AM
      RH 211
      Cullin, M 28

      CRN: 71636
      Section: 601
      Date Range: 08/27-12/09

      Static and dynamic analysis of particles and rigid bodies. Statics topics covered include Newton's laws of motion, Newton's law of gravitational attraction, force and force systems, equilibrium, structural analysis, internal forces, friction, and center of gravity and centroid. Dynamics topics covered include particle and rigid body kinematics and kinetics, force and acceleration, work and energy, impulse and momentum, and vibrations.

      More Info

    Static and dynamic analysis of particles and rigid bodies. Statics topics covered include Newton's laws of motion, Newton's law of gravitational attraction, force and force systems, equilibrium, structural analysis, internal forces, friction, and center of gravity and centroid. Dynamics topics covered include particle and rigid body kinematics and kinetics, force and acceleration, work and energy, impulse and momentum, and vibrations.

  14. A209 Engineering Statics 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    08:30AM-9:45AM
      RH 315
      Dutta, U 17

      CRN: 71637
      Section: 601
      Date Range: 08/27-12/09

      Principles and analysis of static force systems, equilibrium, distributed forces, centroids, centers of gravity, moments of inertia, structures, friction, and virtual work.

      More Info

    3.   T R   10:00AM-11:15AM
      RH 117
      Paris, A 1

      CRN: 71638
      Section: 602
      Date Range: 08/27-12/09

      Principles and analysis of static force systems, equilibrium, distributed forces, centroids, centers of gravity, moments of inertia, structures, friction, and virtual work.

      More Info

    Principles and analysis of static force systems, equilibrium, distributed forces, centroids, centers of gravity, moments of inertia, structures, friction, and virtual work.

  15. A210 Engineering Dynamics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      SSB 250
      Dutta, U 10

      CRN: 71639
      Section: 601
      Date Range: 08/27-12/09

      Kinematics and kinetics of particles and rigid bodies with applications of Newton's second law and principles of work-energy, impulse-momentum, and vibration.

      More Info

    Kinematics and kinetics of particles and rigid bodies with applications of Newton's second law and principles of work-energy, impulse-momentum, and vibration.

  16. A302 Engineering Data Analysis 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   04:00PM-5:15PM
      ENGR 218
      Bham, G 6

      CRN: 71640
      Section: 601
      Date Range: 08/27-12/15

      Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

      More Info

    3.      F  08:30AM-11:15AM
      ENGR 228
      Kretchik, G 6

      CRN: 71641
      Section: 602
      Date Range: 08/27-12/15

      Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

      More Info

    Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

  17. A309 Elements Electrical Engineer 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      RH 111
      Petersen, T 25

      CRN: 71642
      Section: 601
      Date Range: 08/27-12/09

      Electrical fundamentals: elementary circuit analysis, network theorems, steady state, and transient analysis of DC circuits with resistors and one energy storage device (L or C). Steady state analysis of AC circuits with resistors, capacitors, and inductors using complex number and phasor representation. Power in DC and AC circuits. Transformers, meters, and applications of simple electrical components and circuits.

      More Info

    Electrical fundamentals: elementary circuit analysis, network theorems, steady state, and transient analysis of DC circuits with resistors and one energy storage device (L or C). Steady state analysis of AC circuits with resistors, capacitors, and inductors using complex number and phasor representation. Power in DC and AC circuits. Transformers, meters, and applications of simple electrical components and circuits.

  18. A331 Mechanics of Materials 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    04:00PM-5:15PM
      RH 110
      Liu, H 17

      CRN: 71643
      Section: 601
      Date Range: 08/27-12/09

      Stress-strain relations, axially loaded and torsional members, review of shear and bending moment diagrams for beams, flexural and shearing stresses, deflections of beams, plane stress, combined stresses, buckling of columns, elementary design of beams and columns.

      More Info

    Stress-strain relations, axially loaded and torsional members, review of shear and bending moment diagrams for beams, flexural and shearing stresses, deflections of beams, plane stress, combined stresses, buckling of columns, elementary design of beams and columns.

  19. A341 Fluid Mechanics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   10:00AM-11:15AM
      PSB 166
      Hoffman, J 19

      CRN: 71644
      Section: 601
      Date Range: 08/27-12/09

      Introduction to physical properties and behavior of fluids. Topics include hydrostatics and dynamics of liquids and gases, dimensional analysis, fluid forces on immersed bodies, pipe flow, fluid machinery, and open channel flow.

      More Info

    Introduction to physical properties and behavior of fluids. Topics include hydrostatics and dynamics of liquids and gases, dimensional analysis, fluid forces on immersed bodies, pipe flow, fluid machinery, and open channel flow.

  20. A341L Fluid Mechanics Laboratory 1.0
    1. Days Time Location Instructor Open Seats
    2.  M      01:00PM-3:45PM
      ENGR 105
      Hoffman, J 0

      CRN: 71645
      Section: 601
      Date Range: 08/27-12/15

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    3.    W    01:00PM-3:45PM
      ENGR 104
      Hoffman, J 2

      CRN: 71646
      Section: 602
      Date Range: 08/27-12/15

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    4.   T     06:00PM-8:45PM
      ENGR 104
      Hoffman, J 5

      CRN: 71647
      Section: 603
      Date Range: 08/27-12/15

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    5.     R   01:00PM-3:45PM
      ENGR 104
      Hoffman, J 6

      CRN: 71648
      Section: 604
      Date Range: 08/27-12/15

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

  21. A346 Intro to Thermodynamics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   02:30PM-3:45PM
      ENGR 228
      Brock, J 22

      CRN: 71649
      Section: 601
      Date Range: 08/27-12/15

      Fundamental principles and elementary applications of thermodynamics, including the first and second laws of thermodynamics, and thermodynamic systems, properties, processes and cycles.

      More Info

    Fundamental principles and elementary applications of thermodynamics, including the first and second laws of thermodynamics, and thermodynamic systems, properties, processes and cycles.

  22. A411 Northern Design 3.0
    1. Days Time Location Instructor Open Seats
    2.    W    07:00PM-9:45PM
      RH 110
      Abaza, O 41

      CRN: 71650
      Section: 601
      Date Range: 08/27-12/09

      Introduction to design and maintenance of facilities in northern climates to construct sustainable, energy-efficient and durable buildings and infrastructure suitable for the unique needs of northern inhabitants.
      Registration Restrictions: Senior standing or graduate standing in an accredited program in architecture or engineering, or instructor permission.

      More Info

    3.    W    07:00PM-9:45PM
      RH 110
      Adams Jr., W 41

      CRN: 71650
      Section: 601
      Date Range: 08/27-12/09

      Introduction to design and maintenance of facilities in northern climates to construct sustainable, energy-efficient and durable buildings and infrastructure suitable for the unique needs of northern inhabitants.
      Registration Restrictions: Senior standing or graduate standing in an accredited program in architecture or engineering, or instructor permission.

      More Info

    Introduction to design and maintenance of facilities in northern climates to construct sustainable, energy-efficient and durable buildings and infrastructure suitable for the unique needs of northern inhabitants.
    Registration Restrictions: Senior standing or graduate standing in an accredited program in architecture or engineering, or instructor permission.

  23. AC030 Fund of Arctic Engineering 4.5
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Olofsson, J 18

      CRN: 76446
      Section: 801
      Date Range: 10/15-10/26

      Introduces students to a broad spectrum of engineering challenges that are unique to cold regions of the world. Physical principles and practical data collection, analysis, design, and construction methods are discussed. Students gain a working knowledge of cold regions engineering problems and modern solutions.
      Registration Restrictions: Degree in engineering, architecture, landscape architecture, geomatics, or physical science, upper class standing in an undergraduate program in these categories, or instructor permission.

      More Info

    Introduces students to a broad spectrum of engineering challenges that are unique to cold regions of the world. Physical principles and practical data collection, analysis, design, and construction methods are discussed. Students gain a working knowledge of cold regions engineering problems and modern solutions.
    Registration Restrictions: Degree in engineering, architecture, landscape architecture, geomatics, or physical science, upper class standing in an undergraduate program in these categories, or instructor permission.

  24. Mechanical Engineering (ME)

  25. Course Number Course Name Credits
  26. A280 Solid Modeling for Engineers 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   11:30AM-12:45PM
      ENGR 218
      Hoffman, J -1

      CRN: 76965
      Section: 601
      Date Range: 08/27-12/15

      This course is an introduction to the use of solid modeling in engineering. The process of creating solid parts, assemblies, and fabrication-ready drawings in addition to kinematics linkages will be covered. Rapid prototyping technologies such as three dimensional printing will be used as laboratory exercises.

      More Info

    This course is an introduction to the use of solid modeling in engineering. The process of creating solid parts, assemblies, and fabrication-ready drawings in addition to kinematics linkages will be covered. Rapid prototyping technologies such as three dimensional printing will be used as laboratory exercises.

  27. A408 Mechanical Vibrations 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      ENGR 218
      Lobontiu, N 32

      CRN: 72156
      Section: 651
      Date Range: 08/27-12/15

      Modeling of vibratory mechanical systems with single and multiple degrees of freedom. Study of free and forced vibrations with or without damping by lumped-parameter methods and finite element analysis. Vibrations of rotor systems and vibration monitoring.
      Special Note: Not available for credit to students who have completed ME A608.
      May be stacked with: ME A608

      More Info

    Modeling of vibratory mechanical systems with single and multiple degrees of freedom. Study of free and forced vibrations with or without damping by lumped-parameter methods and finite element analysis. Vibrations of rotor systems and vibration monitoring.
    Special Note: Not available for credit to students who have completed ME A608.
    May be stacked with: ME A608

  28. A414 Thermal System Design 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   04:00PM-5:15PM
      RH 315
      Peuker, S 22

      CRN: 72157
      Section: 601
      Date Range: 08/27-12/09

      Course introduces students to the design of power and space conditioning systems, energy conversion, heating, ventilating, air conditioning, refrigeration (HVAC&R), and steady-state simulation of thermal systems.

      More Info

    Course introduces students to the design of power and space conditioning systems, energy conversion, heating, ventilating, air conditioning, refrigeration (HVAC&R), and steady-state simulation of thermal systems.

  29. A414L Thermal System Design Lab 1.0
    1. Days Time Location Instructor Open Seats
    2.  M      05:30PM-7:10PM
      ENGR 109
      Peuker, S 27

      CRN: 79762
      Section: 601
      Date Range: 08/27-12/15

      Provides supplemental explanation and practical exercises applying thermal system design and heating, ventilation and air conditioning (HVAC) concepts including refrigeration systems, psychrometric applications, air handling unit designs, pipe and pump designs, and fan and air distribution designs.

      More Info

    Provides supplemental explanation and practical exercises applying thermal system design and heating, ventilation and air conditioning (HVAC) concepts including refrigeration systems, psychrometric applications, air handling unit designs, pipe and pump designs, and fan and air distribution designs.

  30. A438 *Design Mechanical Engr System 3.0
    1. Days Time Location Instructor Open Seats
    2.      F  11:30AM-2:00PM
      ENGR 109
      Ali, M 30

      CRN: 72158
      Section: 601
      Date Range: 08/27-12/15

      Capstone course in which mechanical engineering students design a mechanical engineering component or system starting with the initial design specification to the implementation and testing. Students apply knowledge and skills learned in their undergraduate curriculum.
      Registration Restrictions: Student must be in senior year of BSE degree program or obtain faculty permission. Completion of GER Tier 1 (basic college-level skills) courses.

      More Info

    Capstone course in which mechanical engineering students design a mechanical engineering component or system starting with the initial design specification to the implementation and testing. Students apply knowledge and skills learned in their undergraduate curriculum.
    Registration Restrictions: Student must be in senior year of BSE degree program or obtain faculty permission. Completion of GER Tier 1 (basic college-level skills) courses.

  31. A441 Heat and Mass Transfer 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    10:00AM-11:15AM
      ENGR 110
      Brock, J 9

      CRN: 72159
      Section: 601
      Date Range: 08/27-12/09

      Application of heat and mass transfer concepts to engineering problems including steady state and transient conduction, numerical analysis of heat transfer problems, laminar and turbulent free and forced convection, and black body and real surface radiation.

      More Info

    Application of heat and mass transfer concepts to engineering problems including steady state and transient conduction, numerical analysis of heat transfer problems, laminar and turbulent free and forced convection, and black body and real surface radiation.

  32. A441L Heat and Mass Transfer Lab 1.0
    1. Days Time Location Instructor Open Seats
    2.     R   05:30PM-7:10PM
      ENGR 110
      Brock, J 33

      CRN: 79763
      Section: 601
      Date Range: 08/27-12/09

      Provides supplemental explanation and practical exercises applying heat and mass transfer concepts to engineering problems including steady state and transient conduction, numerical analysis of heat transfer problems, laminar and turbulent free and forced convection, and black body and real surface radiation.

      More Info

    Provides supplemental explanation and practical exercises applying heat and mass transfer concepts to engineering problems including steady state and transient conduction, numerical analysis of heat transfer problems, laminar and turbulent free and forced convection, and black body and real surface radiation.

  33. A450 Manufacturing Design 3.0
    1. Days Time Location Instructor Open Seats
    2.   T     01:00PM-2:40PM
      Ali, M 9

      CRN: 72160
      Section: 601
      Date Range: 08/27-12/15

      Advanced course that focuses over 3-D applied engineering applications and design. Part design for machining, molding, casting, and sheet metal operations. Methods for applied design for manufacturing and assembly are introduced. Pro/Engineer 3-D part, composite, sheet metal and assembly modules are used to practice variety of engineering design applications.

      More Info

    Advanced course that focuses over 3-D applied engineering applications and design. Part design for machining, molding, casting, and sheet metal operations. Methods for applied design for manufacturing and assembly are introduced. Pro/Engineer 3-D part, composite, sheet metal and assembly modules are used to practice variety of engineering design applications.

  34. A459 Fracture Mechanics 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    04:00PM-5:15PM
      ENGR 109
      Paris, A 23

      CRN: 72161
      Section: 651
      Date Range: 08/27-12/15

      The topics of theoretical, experimental, and applied fracture of solids, structures, and machines, subcritical crack growth including fatigue, creep, and corrosion, embrittlement, safety, and life cycle design and analysis will be presented. Case studies will be used to illustrate the course topics.
      May be stacked with: ME A659

      More Info

    The topics of theoretical, experimental, and applied fracture of solids, structures, and machines, subcritical crack growth including fatigue, creep, and corrosion, embrittlement, safety, and life cycle design and analysis will be presented. Case studies will be used to illustrate the course topics.
    May be stacked with: ME A659

  35. A471 Automatic Control 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    08:30AM-9:45AM
      SSB 251
      Lobontiu, N 24

      CRN: 72162
      Section: 651
      Date Range: 08/27-12/09

      Feedback control of linear mechanical and electrical systems by using block diagrams with transfer functions of plants, controllers, sensors and actuators. Stability analysis with transfer-function and state-space models. Transient, steady-state analysis, frequency-domain analysis, and design of control systems with Bode plots and the Nyquist criterion.
      Crosslisted with EE A471.

      More Info

    Feedback control of linear mechanical and electrical systems by using block diagrams with transfer functions of plants, controllers, sensors and actuators. Stability analysis with transfer-function and state-space models. Transient, steady-state analysis, frequency-domain analysis, and design of control systems with Bode plots and the Nyquist criterion.
    Crosslisted with EE A471.

  36. A497 Independent Study 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Peuker, S 0

      CRN: 80488
      Section: 601
      Date Range: 08/27-12/15
      Section Title: Modular Heat Exchanger Design

      More Info

    3.        
      ARR
      Hoffman, J 0

      CRN: 81258
      Section: 602
      Date Range: 08/27-12/15
      Section Title: Exp Studies in Impact Engr

      More Info

  37. A608 Mechanical Vibrations 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      ENGR 218
      Lobontiu, N 1

      CRN: 79761
      Section: 651
      Date Range: 08/27-12/15

      Modeling of vibratory mechanical systems with single and multiple degrees of freedom. Study of free and forced vibrations with or without damping by lumped-parameter methods and finite element analysis. Vibrations of rotor systems and vibration monitoring.
      Special Note: Not available for credit to students who have completed ME A408.
      Registration Restrictions: Graduate standing or instructor permission.
      May be stacked with: ME A408

      More Info

    Modeling of vibratory mechanical systems with single and multiple degrees of freedom. Study of free and forced vibrations with or without damping by lumped-parameter methods and finite element analysis. Vibrations of rotor systems and vibration monitoring.
    Special Note: Not available for credit to students who have completed ME A408.
    Registration Restrictions: Graduate standing or instructor permission.
    May be stacked with: ME A408

  38. A659 Fracture Mechanics 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    04:00PM-5:15PM
      ENGR 109
      Paris, A 30

      CRN: 72164
      Section: 651
      Date Range: 08/27-12/15

      Theoretical, experimental, and applied fracture of solids, structures, and machines, subcritical crack growth including fatigue, creep, and corrosion, embrittlement, safety, and life cycle design and analysis will be presented. Case studies will be used to illustrate the course topics.
      May be stacked with: ME A459

      More Info

    Theoretical, experimental, and applied fracture of solids, structures, and machines, subcritical crack growth including fatigue, creep, and corrosion, embrittlement, safety, and life cycle design and analysis will be presented. Case studies will be used to illustrate the course topics.
    May be stacked with: ME A459

  39. A664 Corrosion Processes Engineer 3.0
    1. Days Time Location Instructor Open Seats
    2.   T     06:00PM-8:45PM
      ENGR 109
      Cullin, M 29

      CRN: 72165
      Section: 601
      Date Range: 08/27-12/15

      The study of different corrosion processes and mechanisms. Topics include the concepts, materials, and mechanisms of corrosion with application to engineering design for corrosion prevention.
      Registration Restrictions: Prerequisite and graduate standing, or faculty permission.

      More Info

    The study of different corrosion processes and mechanisms. Topics include the concepts, materials, and mechanisms of corrosion with application to engineering design for corrosion prevention.
    Registration Restrictions: Prerequisite and graduate standing, or faculty permission.

  40. A685 Arctic Heat/Mass Trans 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Lang, R 15

      CRN: 72166
      Section: 801
      Date Range: 08/27-12/15

      Application of the principles of heat and mass transfer with special emphasis on application to problems encountered in the Arctic such as ice and frost formation, permafrost, condensation, and heat loss in structures.
      Registration Restrictions: Graduate standing, with a degree in engineering or physical science, or upper class standing in an accredited undergraduate program in these categories.

      More Info

    Application of the principles of heat and mass transfer with special emphasis on application to problems encountered in the Arctic such as ice and frost formation, permafrost, condensation, and heat loss in structures.
    Registration Restrictions: Graduate standing, with a degree in engineering or physical science, or upper class standing in an accredited undergraduate program in these categories.

* - Course meets a GER requirement