Dr. Wang

Dr. Hsueh-Ming Steve Wang

Chair of the Engineering Science Management Department
Office: UC 157
Phone: 907-786-1914
Email: hswang@uaa.alaska.edu
Website: http://afhsw1.uaa.alaska.edu/

Biography

Honors and Awards

2015 Meritorious Service Awardof American Society for Engineering Management

2014 Extreme Learning Process (XLP) project won REIMAGINE EDUCATION Regional Award Asia.

2013 Alaska Governor’s North Star Award for International Excellence in Humanitarian Efforts

2012 The Honorary International Chair Professor in Management of Technology, National Taipei University of Technology (2012 to 2014)

2010 Meritorious Service Awardof American Society for Engineering Management

2005        Personal Quality Award of Chinese Society for Quality, Taiwan

2003 Second Grade Medal for senior excellent voluntary counseling from Taiwan government.

1999 Medal of Scholarship, Second Class from Taiwan government.

1994 Order of Loyalty and Diligence from Taiwan government.

1993 Medal of Excellent Efficiency: for excellent researchers from Taiwan government.

1992 Gold Hand Medal: for excellent voluntary counseling from Taiwan government


Education

1999 Ph.D., Industrial and Systems Engineering, Lehigh University, PA
1999 M.S., Management of Technology, Lehigh University, PA
1989 Master of Manufacturing Engineering, Northwestern University, IL 
1983 B.S., Mechanical Engineering, National Chung Chang Institute of Technology, Taiwan

Career History

Academic Appointments

  • 2012-present Associate Professor, Engineering and Science Management (ESM) Program, University of Alaska Anchorage
  • 2012-2015 ESM Program Chair, University of Alaska Anchorage
  • 2014-Present Visiting Professor, Mechanical Engineering, National Taiwan University of Science and Technology
  • 2013 Adjunct Professor, College of Architecture and Urban Planning, Beijing University of Technology
  • 2013 Visiting Professor, Industrial Engineering, Tsinghua University, Beijing
  • 2012-2014 Honorary International Chair Professor, National Taipei University of Technology
  • 2010-2012 Associate Professor, Chair of ESM Department, University of Alaska Anchorage
  • 2009 Adjunct Professor, Beijing Cohort EMBA program for University of Texas, Arlington
  • 2007-2010 Assistant Professor, Coordinator of ESM program, University of Alaska Anchorage
  • 2005-2007 Assistant Professor, Director of EMBA program, University of Alaska Anchorage
  • 1999-2004 Adjunct Professor, Graduate Institute of Commerce Automation and Management (ICAM), National Taipei University of Technology, Department of Systems Engineering, National Defense University, and Department of Management of Information Systems, Shih-Chien University
  • 1998-1999 Research Assistant, Industrial Engineering, Lehigh University. Re-engineering of facilities layout for PEM Co. and Rhetech Co.; Forecasting of Production Capacity for M.A. Hanna Co,; Activity Based Costing/Management for Lutron Co.
  • 1995-1997 Teaching Assistant and Instructor, Industrial Engineering, Lehigh University. Time Motion Study, Advanced Manufacturing Processes

Supervised Research Projects

·        Research on the quantitative model of personality career matching based on big data methodology and implementation of the evaluation system, (International project supported by Beijing Jiaotung University, China, PI Hongyang Zhang), April 2013 – April 2014.

·        Extreme Learning Process (XLP) (International project supported by Tsinghua University, China, about $200,000), January 2013.

·        Analysis of Technology Change of Waste-to-Energy for Solid Waste Management (Faculty Development Fund, supported by University of Alaska, Anchorage, $ 9,000) July 1, 2011 –December 31, 2011

·        Optimal Analysis of a Hybrid Solar-Wind Power Generation System with LPSP technology for LED Lighting System on UAA Campus (Faculty Development Fund, supported by University of Alaska, Anchorage, $ 9,000) January 1, 2009 –June 30, 2009

·        Fall 2008/Spring 2009 Special United Academics Research Travel Grant Round Two for the Institute of Industrial Engineers Annual Conference & Expo 2009.(Research Travel Fund, supported by University of Alaska, Anchorage, US 1,000) July 1, 2008 to June 30, 2009

·        Economic Analysis of Alaska Street Lights by using Light-Emitting Diode (LED) technology (Alaska University Transportation Center supported by Federal Fund, $185,282) September 1, 2008 – September 1, 2010

·        Replacement Analysis of Alaska Street Lights by using Light-Emitting Diode (LED) energy saving technology (Faculty Development Fund, supported by University of Alaska, Anchorage, $ 9,000) January 1, 2008 –June 30, 2008

·        Ubiquitous computing for an RFID system innovation for health evaluation center of Chang Gung Memorial Hospital implemented by Six Sigma (supported by Chang Gung Memorial Hospital, $10,000) April 1, 2006 - March 30, 2007

Patents

"Method for measurement and verification of the optimum optical path for ring laser gyroscope"

  • United States Patent, Patent No.: US6,396,585 B1, May 28, 2002.
  • Taiwan Patent, Patent No.: Invention 129672, March, 2001.

Invited Talks, Commentaries and Works

  • “Quality Management System, ISO 9001:2008,” for CH2MHILL and American Society for Quality, Alaska Section, BP Energy Center, Oct. 29, 2009.
  • “Unlimited infinite – leading in the fundamental change,” Providence University, Taiwan, June, 18, 2009.
  • “Sustainability,” American Society for Quality, Alaska Section, BP Energy Center, March, 12, 2009.
  • “My humble observation for quality management in Alaska,” American Society for Quality, Alaska Section, BP Energy Center, January, 22, 2009.
  • “EQUATOR AQUARIAN CLINIC – Pediatric Health Care Center, Rwanda, East Africa,” Project Engineer for Design for Children Competition, January, 15, http://designforthechildren.org/index.php.
  • “Program Management- Recent research on program management of Alaska Pipelines”, National Project Management Association (NPMA), Taiwan, June, 24, 2008.
  • “The emerging trend of education program for engineering and science management,” Master Speech, Beijing Industrial University, China, May, 2008.
  • “The emerging trend of education program for project management,” Master Speech, Beijing Industrial University, China, May, 2008.
  • “The emerging trend and development of project management,” Keynote Speaker of the annual meeting of National Project Management Association (NPMA), Taiwan, Jan, 2008, Taiwan.
  • “The emerging trend of project management – project portfolio management,” ConocoPhillips, Anchorage, Dec. 2007.
  • “The application of blue ocean strategy and model simulation,” Top Level Managers Forum, Chang Gung Medical Center, Taiwan, March, 2006.
  • “The historical survey of the high-tech development and encouragement strategies for R&D activities in Hsinchu science park of Taiwan,” Hanbat University Forum, South Korean, June, 2005.
  • “Six sigma quality management,” Top Level of Quality Managers Forum, Department of Rapid Transit Systems, Taipei City Government , March, 2004 (in Chinese).

Teaching Responsibilities

  • University of Alaska, Anchorage, Graduate/Undergraduate
    • Total Quality Management, Engineering Economy, Statistics for ESM, Technology Management, Operations Research, Project Quality Management, Engineers in Organizations, Project Cost Management, ESM Project, ESM Thesis Engineering Economy
  • National Taiwan University of Science and Technology, Graduate
    • Sustainable Design-centered Manufacturing
  • Beijing University of Technology, Graduate
    • Service Design
  • University of Texas, Arlington, Graduate
    • Project Management
  • Chang Gung University, Graduate/Undergraduate
    • Project Management, Management of Technology, Total Quality Management, Information Technology and Competitive Advantages, Time Series Analysis Statics, Engineering Economics
  • Shih-Chien University, Undergraduate
    • System Analysis and Design, Enterprise Resource Planning and Logistic Management
  • National Taipei Univ. of Technology, Graduate/Undergraduate
    • Field Study Seminar, Sustainable Design Centered Management, Business Statics, Total Quality Management
  • National Defense University, Graduate/Undergraduate
    • Quality Engineering, Supply Chain Management, Global manufacturing logistics, Sustainability and Life Cycle Cost Analysis, Precisions Engineering, Computer Integrated Manufacturing (CIM), Acquisition Management, Statistical Process Control, Inspection and Sampling, Six Sigma Quality Management

Professional and Departmental Service

Professional Membership

American Society of Mechanical Engineering (ASME)

American Society Engineering Management (ASEM)

Institute of Industrial Engineers (IIE)

Toastmaster International, Advanced Communicator Silver

Chinese Society for Quality (CSQ), Taiwan, Life member

Chinese Society for Management of Technology, Taiwan, Life Member

National Project Management Association, Taiwan, Life Member

The Taiwan Association of Abrasive Technology, Life Member

Professional Services

President of the 11th International Green Energy Conference, Anchorage, May 8-11, 2016.

Guest Editor, Special Issue "Optimization Methods in Information and Management Sciences," The Scientific World Journal, 2014

Editorial Review Board, Journal of Modern Project Management (MIT, Sloan School of Management)

Editorial Review Board, International Journal of Business Analytics

 

Advisory Board member of EMBA Alumni Association of National Taipei University of Technology

Board member of National Project Management Association, Taiwan

Board member, Alaska Geotourism Committee, 2013-now

Advisory Board for “Engineering Economy” of Industrial Engineering Research Conference (IERC), 2013-2015

President for “Engineering Economy” Division of Industrial Engineering Research Conference (IERC), 2011-2012

 

Session Chair for 2012 International Society for Quality Management (ISQM), Taiwan, November 2012

Session Chair for "Sustainability for Business Intelligence on Technology Management and New Product Development" of Institute of Operation Management and the Management Science (INFORMS), USA, 2011

Session Chair for “Innovation Management for Sustainability” of Institute of Operation Management and the Management Science (INFORMS), USA, 2010

Committee of Sustainability Action Board, University of Alaska Anchorage, 2010 -2011 &2014

Editor of Practice Periodical, American Society Engineering Management (ASEM), 2009-2010

Board member, American Society Engineering Management (ASEM), 2009-2010

Track Chair for “Engineering Economy” of Industrial Engineering Research Conference (IERC), 2011

Communications Director, Engineering Economy Division Board, Institute of Industrial Engineers, 2009-2010

Session Chair for “Technology Change Management for Sustainability” of Institute of Operation Management and the Management Science (INFORMS), USA, 2009

Member of National Coalition Building Institute (NCBI) of University of Alaska Anchorage (Since 2009)

International Organizing Committee Chair, The 4th International Project Management Conference (PROMAC 2008), Anchorage, September 2008

Section chair of the 2006 International Conference of Management of Healthcare and Biotechnology Industry, Taipei, July 2006

Voluntary Supervisor for psychological counselors of Taipei Counseling Center; 2003 to 2007

Chairperson of the publish affair committee in CSQ, Taiwan; 2003 to2007

Member of the international affair committee in CSQ, Taiwan; 2002 to 2007

Observer, board meeting of Asian Network for Quality in Tokyo, Japan; 2005

Volunteer, psychological counselors of Taipei Counseling Center; 2000 to 2003 and 1990 to 1995

VP of student chapter, Lehigh University for Society of Manufacturing Engineering; 1999

President, Chinese Student Association of Lehigh University; 1998

Computer and Other Skills

Certificate of Art Instruction Schools, Minneapolis (Student No. 168767)

Matlab, SPSS, E Views, Arena, Lisrel, and Statgraphics

Sustainability Across Curriculum Workshop, AASHE, Emory University, January 10-11, 2012

The Mediation Process, 40hrs training by Mares-Dixon & Associates, February 2010

Fluent in English and Chinese; able to read Japanese

Research Interests

Supervised research projects

·        Research on the quantitative model of personality career matching based on big data methodology and implementation of the evaluation system, (International project supported by Beijing Jiaotung University, China, PI Hongyang Zhang), April 2013 – April 2014.

·        Extreme Learning Process (XLP) (International project supported by Tsinghua University, China, about $200,000), January 2013.

·        Analysis of Technology Change of Waste-to-Energy for Solid Waste Management (Faculty Development Fund, supported by University of Alaska, Anchorage, $ 9,000) July 1, 2011 –December 31, 2011

·        Optimal Analysis of a Hybrid Solar-Wind Power Generation System with LPSP technology for LED Lighting System on UAA Campus (Faculty Development Fund, supported by University of Alaska, Anchorage, $ 9,000) January 1, 2009 –June 30, 2009

·        Fall 2008/Spring 2009 Special United Academics Research Travel Grant Round Two for the Institute of Industrial Engineers Annual Conference & Expo 2009.(Research Travel Fund, supported by University of Alaska, Anchorage, US 1,000) July 1, 2008 to June 30, 2009

·        Economic Analysis of Alaska Street Lights by using Light-Emitting Diode (LED) technology (Alaska University Transportation Center supported by Federal Fund, $185,282) September 1, 2008 – September 1, 2010

·        Replacement Analysis of Alaska Street Lights by using Light-Emitting Diode (LED) energy saving technology (Faculty Development Fund, supported by University of Alaska, Anchorage, $ 9,000) January 1, 2008 –June 30, 2008

·        Ubiquitous computing for an RFID system innovation for health evaluation center of Chang Gung Memorial Hospital implemented by Six Sigma (supported by Chang Gung Memorial Hospital, $10,000) April 1, 2006 - March 30, 2007

Publications

Patents

“Method for measurement and verification of the optimum optical path for ring laser gyroscope”

·        United States Patent, Patent No.: US6,396,585 B1, May 28, 2002.

·        Taiwan Patent, Patent No.: Invention 129672, March, 2001.

 

COPYRIGHTS

“DISC Personality Assessment and Profession Forecasting System on Line, V2.0” Software, Copyright No. 2014SR109845, China, January, 20, 2014.

 

JOURNAL PAPERS

Steve Hsueh-Ming Wang, Paula Williams, Jing Shi, Huojun Yang , “From Green to Sustainability --Trends in the Assessment Methods of Green Buildings,” Frontiers of Engineering Management, (Accepted in Oct. 2015)

Jung-Fa Tsai, C. Alec Chang, Chih-Chou Chiu, and Steve Hsueh-Ming Wang, “Optimization Methods in Information and Management Sciences -Editorial,” The Scientific World Journal, Volume 2015 (2015), Article ID 498951.

Yachao Wang, Jing Shi, and Steve Hsueh-Ming Wang, “ Post processing of metal and ceramic components fabricated by laser assisted additive manufacturing: A review,” Journal of Materials Processing Technology, (Submitted in January 2015.)

Jing Shi, Chunhui Ji, Yachao Wang, and Steve Hsueh-Ming Wang, “Tool/Chip Interfacial Friction Analysis in Atomistic Machining of Polycrystalline Coppers,” Journal of Micro and Nano-Manufacturing, (Accepted in July 20, 2014).

Sheng-Shu Cheng, Fong-Jung Yu, and Steve Hsueh-Ming Wang, “A CUSUM Control Chart to Monitor Wafer Production Quality,” Journal of Information & Optimization Sciences, Vol. 35, No. 5-6, pp. 483-501, January, 2015.

Hiroyuki Matsuura, Edgar Blachford, Steve Hsueh-Ming Wang, Tony Nakazawa, “Who is the samurai musher? Jujiro Wada: The Jujiro Wada Story as a geotourism/cultural tourism opportunity for Alaskan communities,” Studies in Science and Technology, Vol. 3, No. 2, pp. 165-168, December 2014.

Steve Hsueh-Ming Wang, Yen Rei Qui, Chao-Chang Chen, Shu Ping Chang, ”A Survey of Sustainable Design-Centered Integration for Medical Additive Manufacturing,” Advanced Materials Research, Special Volume: Advances in Materials and Processing Technologies XVI, p.635, 2014.

Steve Hsueh-Ming Wang, Sheng Pen Wang, Wenyih Lee, “Reducing client waiting time in a Health Evaluation Center using the Design for Six Sigma method,” Engineering Management Journal, Vol. 26, No. 2, pp. 62-73,June, 2014.

Steve Hsueh-Ming Wang, “Searching the future global entrepreneurship from the history - the Alaskan legacy of Jujiro Wada,” Quality Magazine, Chinese Society for Quality, Vol. 49, No. 3, pp. 18-23, March 2013 (in Chinese).

Hiroyuki Matsuura, Anthony Tasashi Nakazawa, Ted Jacobson, Doug Huntman, Edgar Blatchford, Steve Hsueh-Ming Wang, “Can we address village Alaska’s solid waste problem? Rural development management strategies to address a vital element of rural Alaska sustainability,” Taisei Gakuin University Bulletin, Japan, Vol. 16, No. 33, pp. 123-134, March, 2014.

Steve Hsueh-Ming Wang, “Trends in sustainable design-centered Manufacturing,” Advanced Materials Research, Vol. 579, p.494-500, October, 2012.

Steve Hsueh-Ming Wang, K. M. Spohn, LuAnn Piccard, Lei Yao, “Feasibility study of the wind power generation system at arctic valley of Anchorage,” Engineering Management Journal, Vol. 22, No. 3, pp.21-33, September 2010.

Steve Hsueh-Ming Wang, “Important factors for organizational performance evaluation through implementation of earned value management (EVM) in the north Taiwan,” Journal of Society of Project Management International, Japan, August 18, 2008.

Steve Hsueh-Ming Wang, “The emerging trend and development of project management,” Manager Today, pp.146-157, Taiwan, April 2008 (Invited in Chinese).

Steve Hsueh-Ming Wang, Ming-Yang Huang, “Strategy analysis of Taiwan defense industry,” Strategy and International Research, 4(2), Taiwan Research Institute, pp. 19-47, March 2002 (Invited in Chinese).

Steve Hsueh-Ming Wang, G. Sathyanarayanan, and Louis Plebani, “Modeling considerations for ultrasonic machining,” Abrasives Magazine, October/November 1998; pp. 16-24.

Steve Hsueh-Ming Wang, Mi-Hsiang Wen and Lung Yung Lin, “Introduction of micro electromechanical systems (MEMS),” Hsin Hsin Bimonthly of CSIST, 1994 (in Chinese).

 

Book and Chapters

Steve Hsueh-Ming Wang, Six Sigma Project Management, Chinese Society for Quality, 2nd Edition, March 2006. (in Chinese)

Steve Hsueh-Ming Wang, Analysis of the effect of the process parameters on material removal rate in Ultrasonic Machining, PhD Dissertation, Lehigh University, January 1999. (Advisor, Guruswamy Sathyanarayanan)

Steve Hsueh-Ming Wang, Management of the technology change for the PC based information system, MS thesis, Lehigh University, January 1999. (Advisor, Ted Shlie)

Steve Hsueh-Ming Wang, G. Sathyanarayanan, and Louis Plebani, “Ultrasonic machining: 1907 to present,” Manufacturing Science and Technology, Vol. 2 ASME, 1997, pp. 169-176.

Steve Hsueh-Ming Wang, G. Sathyanarayanan, and Louis Plebani, “Effect of creep feed grinding parameters on strength and finish of alumina,” Composites and Functionally Graded Materials, ASME, 1997, pp. 411-415.

Steve Hsueh-Ming Wang, Vibration control in a high-speed gantry type CNC machine, project report for Master of Manufacturing Engineering, Northwestern University, September 1989. (Advisor, Kornel Ehmann)

PROCEEDING papers

Steve Hsueh-Ming Wang, Shu-Ping Chang, Jing Shi, “Determination of Sustainable Design-centered Factors for Manufacturing Bioprinting Material of Polylactic Acid,” Accepted by Proceedings of the ASME 2015 International Manufacturing Research Conference, MSEC 2015 and NAMRC 43, Charlotte, North Carolina, USA, June 8-12, 2015.

Steve Hsueh-Ming Wang, Shu-Ping Chang, Paula Williams, Benjamin Koo, Yan-Rui Qu, “Using Balanced Scorecard for Sustainable Design-centered Manufacturing,” Accepted by Proceedings of the ASME 2015 International Manufacturing Research Conference, MSEC 2015 and NAMRC 43, Charlotte, North Carolina, USA, June 8-12, 2015.

Steve Hsueh-Ming Wang, Teresa J. Williams, “Feasibility Analysis of Using Local Remanufactured Products – A Case Study of Industrial Starts and Alternators,” Accepted by Proceedings of the ASME 2015 International Manufacturing Research Conference, MSEC 2015 and NAMRC 43, Charlotte, North Carolina, USA, June 8-12, 2015.

Steve Hsueh-Ming Wang, Chris McConnell, “Implementing Building Information Modeling (BIM) for Construction Management of Sports Arena of University of Alaska Anchorage,” submitted to Proceedings of the 2015 Industrial and Systems Engineering Research Conference, Nashville, Tennessee, May 30 – June 2, 2015.

Chunhui Ji, Jing Shi, Yachao Wang, and Steve Hsueh-Ming Wang, “Tool/Chip Interfacial Stress Distributions in Atomistic Machining of Polycrystalline Coppers,” Proceedings of the ASME 2014 International Manufacturing Science and Engineering Conference, MSEC2014, Detroit, Michigan, USA, June 9-13, 2014.

Steve Hsueh-Ming Wang, Lei Yao, Shi Jing, “Sustainable Design of a Smart Grid Photovoltaics System for Subarctic Regions,” Proceeding of the Ninth Annual Green Energy Conference, International Association for Green Energy, Tianjing, China, May 25-28, 2014.

Ergin Erdem, Ying She, Jing Shi, Steve Hsueh-Ming Wang, “Vector Auto Regressive Models with Exogenous Variables for Predicting Wind Speed,” Proceeding of the Ninth Annual Green Energy Conference, International Association for Green Energy, Tianjing, China, May 25-28, 2014.

Steve Hsueh-Ming Wang, James C Casper, “Scenario Analysis of Alaska’s Power Cost Equalization endowment fund for electrical subsidies in rural Alaska,” Proceedings of 2013 International Annual Conference of ASEM, Minneapolis, MN, October 2, 2013.

Zhi Li, Steve Hsueh-Ming Wang, LuAnn Piccard, “Strategic Analysis of Project Portfolio Management for World Bank in China from 1996 to 2008,” Proceedings of ASEM annual conference, Lubbock, TX, October 19-22, 2011.

Steve Hsueh-Ming Wang, O. Bukhtiyarov, J. Chen, “Reliability Analysis of LED Based Streetlights on the Temperature effect,” Proceeding of IES Annual Conference, Toronto, November 5-9, 2010.

Steve Hsueh-Ming Wang, LuAnn Piccard, C. Pedersen, L. Yao, “Schedule Slip Forecasting for Oil and Gas Engineering Projects,” Proceedings of International Annual Conference of ASEM, Spring Field, MO, October 15, 2009.

Karl M. Spohn, Steve Hsueh-Ming Wang, LuAnn Piccard, L. Yao, “Wind Power Generation System Design for Arctic Valley in Anchorage, Alaska,” Proceedings of International Annual Conference of ASEM, Spring Field, MO, October 15, 2009.

Steve Hsueh-Ming Wang, Helen Liu, Jimmy Chen, “Replacement Analysis of the LED lighting Systems,” Proceedings of the 4th Annual International Project Management Conference (PROMAC 2008), Anchorage, September 15, 2008.

Steve Hsueh-Ming Wang, Lin-Cheung Chen, Helen Liu, & Jang Ra, “Analysis of the Future R&D Collaboration and Competition Strategies for ICT & FPD Industries between Taiwan and South Korea, Proceedings of the Annual meeting of Production and Operation Management Society (POMS), May 8th, 2008.

Steve Hsueh-Ming Wang, “Adaptive control of the patient scheduling with RFID technology in a health evaluation center” Proceedings of the 37th Annual Meeting of the Decision Sciences Institute, San Antonio, USA, November 2006.

Steve Hsueh-Ming Wang, Yuan Tz Ho, “Analysis of the brand equity for Essence of Chicken in the Taiwan health food market,” 2006 International Conference of Management of Healthcare and Biotechnology Industry, Taipei, July 2006.

Steve Hsueh-Ming Wang, Wenyih Lee and Da-Ren He, “Uncertainty estimation of calibration curve in chemical analysis,” Proceedings of the 3rd ANQ Congress and 19th Asia Quality Symposium, Taipei, Taiwan, pp. 819-828, Sept 2005.

Steve Hsueh-Ming Wang, “Verification of the conditions for implementation of Earned Value Management (EVM) methodology in the governmental R&D organization in Taiwan,” Proceedings of Portland International Conference for Management of Engineering and Technology (PICMET), Portland, OR, U.S.A., July, 2005.

Steve Hsueh-Ming Wang, M. Y. Huang, and F. S. Lin, “A study for the strategies of total quality management in Taiwan,” Proceedings of the 2001 Conference of Asian Quality Association, Daijeon, Korea, pp. 43-46, November 2001.

Steve Hsueh-Ming Wang, Chaug Liang Hsu and Lung Yung Lin, “The application of Petri Nets for supply chain management,” Proceedings to The Sixth International Automation Conference, Taipei, Taiwan, pp. 941-955, May 2000.

Steve Hsueh-Ming Wang, Mi-Hsiang Wen and Lung Yung Lin, “A Stochastic approach to predict fracture zone and material removal rate in Ultrasonic Machining,” Proceedings of International Precision Engineering Conference, Singapore, March 2000.

Steve Hsueh-Ming Wang, Mi-Hsiang Wen, and Lung Yung Lin, “The measurement algorithm for the quality control of the interface between optic and mechanical device,” Proceedings of International Precision Engineering Conference, Singapore, March 2000.

Steve Hsueh-Ming Wang, Mi-Hsiang Wen, and Lung Yung Lin, “Low cost design for the CIM of different types of CNC controller,” Proceedings of Second International Conference on Manufacturing Technology, Hong Kong, December 1993.

Steve Hsueh-Ming Wang, Mi-Hsiang Wen, and Lung Yung Lin, “Improvement of rotary ultrasonic deep hole drilling of glass ceramics-Zerodur,” Proceedings of Seminar of the 7th international precision engineering, Kobe, Japan, May 1993.

Conference Presentatons

Steve Hsueh-Ming Wang, Isaac Pearson, “Survey of Internet of Things for Quality Management in Engineering Design Service,” International Annual Conference of ASEM, Indianapolis, IN, October 8, 2015.

David Dehass, Anthony Nakazawa, Hiroyuki Matsuura, Steve Hsueh-Ming Wang, Edgar Blatchford, “The Technology Transfer Role of the Cooperative Extension Model in Remote Rural Communities: the Alaska Experience,” the 8th International Technology, Education, and Development Conference, Valencia, Spain, March, 10-12, 2014.

Steve Hsueh-Ming Wang, Benjamin Koo, Fei Shi, Li-Qian Yeung, Tien-Fa Hou, “Assessment of Trans-disciplinary System Integration Extreme Learning at Tsinghua University, China,” ISERC, Puerto Rico, May 18-22, 2013 (Invited Speech).

Steve Hsueh-Ming Wang, Cheyenne Alabanzas, “Health Risk Analysis of Adapting Plasma Gasification Process for Solid Waste Management,” ISERC, Puerto Rico, May 18-22, 2013 (Invited Speech).

Steve Hsueh-Ming Wang, “Sustainable Service and Tourism Center at University of Alaska Anchorage,” Cultural Tourism Summit, Alaska Native Heritage Center, April 19, 2013.

Steve Hsueh-Ming Wang, Leslie Simmons, Anthony Nakazawa, “Evaluation of Technological and Environmental Impacts of Plasma Gasification Process for Waste-to-Energy,” ISERC, Orlando, Florida, May 19-23, 2012.

S. Jimmy Gandhi, Steve Hsueh-Ming Wang, “Obtaining a Competitive Advantage in Global Sourcing Projects by Implementing Social Sustainability Metrics,” ISERC, Orlando, Florida, May 19-23, 2012.

Steve Hsueh-Ming Wang, “Sustainable design-centered Manufacturing,” Invited speaker for The 4th International Conference on Advanced Manufacturing (ICAM) 2012, Yilan, Taiwan, March 4-8, 2012.

Steve Hsueh-Ming Wang, “Manufacturing for Design and Sustainability,: INFORMS, Charlotte, November 13-16, 2011.

Steve Hsueh-Ming Wang, Lei Yao, “Feasibility Analysis of a Mini Smart Grid Photovoltaic System,” IERC, Reno, Nevada, May 21-25, 2011.

Leslie Simmons, Steve Hsueh-Ming Wang, “The Critical Factors for Decision-making of the Technology Policies of the Industrialized Countries for Municipal Solid Waste Management,” INFORMS, Austin, TX, November 7-10, 2010.

Steve Hsueh-Ming Wang, Muchiu Chang "Cognitive Oriented Integration for Innovation Management," INFORMS, Austin, TX, November 7-10, 2010.

Seong Dae Kim, Steve Hsueh-Ming Wang, "Curriculum Development for the Innovation Management Program for sustainability," INFORMS, Austin, TX, November 7-10, 2010.

Peter Lang, Steve Hsueh-Ming Wang, "Agility Management for the Project Sustainability," INFORMS, Austin, TX, November 7-10, 2010.

H. M. S. Wang, Oleg Bukhtiyarov, Jimmy Chen, “Analysis of the Warranty Limits for LED Based Streetlights by the Temperature Effect,”2010 International Conference on e-Business Engineering (ICEBE 2010), Shanghai, China, Oct. 20-22, 2010

LuAnn Piccard, Steve Hsueh-Ming Wang, L. Yao, “Patent Mapping for Forecasting the Technology change of Light Emitted Diode (LED) Street lights,” INFORMS, San Diego, CA, October 12, 2009.

Oleg Bukhtiyarov, LuAnn Piccard, Steve Hsueh-Ming Wang, “Optimization Analysis of Warranty for the Technology Change of LED streetlights,” INFORMS, San Diego, CA, October 12, 2009.

L. Yao, LuAnn Piccard, Steve Hsueh-Ming Wang, “Replacement Analysis of Small off-grid Nuclear Reactors,” INFORMS, San Diego, CA, October 12, 2009.

Steve Hsueh-Ming Wang, He Liu, LuAnn Piccard, “Optimal Analysis of a Hybrid Solar-Wind Power Generation System with LPSP Technology for LED Lighting System,” INFORMS, San Diego, CA, October 12, 2009.

Steve Hsueh-Ming Wang, “RFID in Grouped-Patient Waiting Time of Health Evaluation Center,” IERC, Miami, May 30, 2009.

Steve Hsueh-Ming Wang, “Sustainability Design and Analysis of Light-Emitting Diode (LED) System,” INFORMS, Washington, D. C., October 14, 2008.

Steve Hsueh-Ming Wang, “Reducing Patient Waiting Time in a Health Evaluation Center Using the Six Sigma Method,” INFORMS, Seattle, November 6, 2007.

Steve Hsueh-Ming Wang, Chien-Ting Lee, “Designing the Stock Trading Processes in the Proprietary Trading Department of a Securities Firm by Utilizing Six Sigma Method,” IFORMS Annual Meeting San Francisco, USA, November 2005.

 

Industry/National Laboratory Appointments

1999-2004 Program Manager, Re-engineering Specialist, Chung Shan Institute of Science and Technology (CSIST), Taiwan.

·        Member of the CSIST organizational re-engineering committee

·        Project manager for implementation of a balanced scorecard performance evaluation system for CSIST

·        Pilot implementation of Earned Value Management system for program management

·        Project for design of servo mechanisms for IC sputtering machine and manufacturing process for ring laser gyroscope

1989-1994 Director of Manufacturing and Technical Manager, Chung Shan Institute of Science and Technology, Taiwan.

·        Nontraditional manufacturing including Electrical Discharge Machining (EDM), Rotary Ultrasonic Machining (RUM)

·        Metrology for optic devices

·        Computer Integrated Manufacturing (CIM)

·        High speed machining

·        Brittle material grinding, lapping, and polishing

·        Direct Numerical Control (DNC) system including RS232 interface networking

·        Process quality control

1983-1988 Manufacturing Engineer, Chung Shan Institute of Science and Technology, Taiwan.

·        CAD/CAM including CNC programming

·        Design of Standard Operation Procedure (SOP) for a batch production system

·        Cutting tools inventory control system

·        Fine blanking

·        Residue stress relief after machining

Invited Talks, Commentaries and Works

  • “Accountability for sustainability,” Invested Speech, Mechanical Engineering, National Taiwan University of Science and Technology, December 22, 2015.
  • “Sustainable Development of Green Buildings,” Invested Speaker, The First International Forum on Engineering Management & the 9th China Engineering Management Forum (IFEM & CEMF 2015), hosted by Chinese Academy of Engineering, Guangzhou, China, May 12-13, 2015.
  • An official presentation of the Jujiro Wada story to the Sister City Delegation from Chitose, Japan at the Anchorage Museum, July 2014
  • “LED lighting for indoor plants,” Alaska Orchid Society, April 22, 2014.
  • “Sustainability and green building,” College of Engineering Speech Series, UAA, April 22, 2014.
  • “Survey of the implementation of Building Information Modeling (BIM) in the western counties,” Beijing University of Technology, November, 2013.
  • “Tourism as a positive force in public process,” Discussant for Detroit Tourism Conference, August 8, 2013.
  • ““Assessment of trans-disciplinary system Integration extreme learning at Tsinghua University,” College of Engineering Speech Series, UAA, March 20, 2013.
  • “Assessment of trans-disciplinary system integration extreme learning workshop,” Program consultant and observer, Tsinghua University, China, January 14 to January 17, 2013.
  • “Sustainability for education,” Business College, Chang Gung University, January, 2013.
  • “The trend of the industrial design in China,” Chang Gung University, December, 2012.
  • “Competitive advantage through sustainable design-centered management,” Alumni Advisory Board of National Taipei University of Technology, December, 2012.
  • “Building information modeling, BIM,” SiChung University, China, November, 2012.
  • “Green architectures,” SiChung University, China, November, 2012.
  • “Sustainable design-centered manufacturing,”  National Taiwan University of Science and Technology, National Taipei University of Technology, Fu Jen University, Kanan University, Beijing University of Technology, Fall semester, 2012.
  • “Balanced Scorecard,” Arctic Slope Regional Corporation Energy Services, April 23, 2012.
  • “Decision making – A peaceful mind generates power,” Rotary Club of Anchorage Russian Jack, August 30, 2011.
  • “The emerging trend and development of project and engineering management,” School of Traffic and Transportation Engineering, Changsha University of Science and Technology, China, October 21, 2010.
  • “Quality Management System, ISO 9001:2008,” for CH2MHILL and American Society for Quality, Alaska Section, BP Energy Center, October 29, 2009.
  • “Unlimited infinite – leading in the fundamental change,” Providence University, Taiwan, June, 18, 2009.
  • “Sustainability,” American Society for Quality, Alaska Section, BP Energy Center, March, 12, 2009.
  • “My humble observation for quality management in Alaska,” American Society for Quality, Alaska Section, BP Energy Center, January, 22, 2009.
  • “EQUATOR AQUARIAN CLINIC – Pediatric Health Care Center, Rwanda, East Africa,” Project Engineer for Design for Children Competition, January, 15, 2009, http://designforthechildren.org/index.php.
  • “Program Management- Recent research on program management of Alaska Pipelines”, National Project Management Association (NPMA), Taiwan, June, 24, 2008.
  • “The emerging trend of education program for engineering and science management,” Master Speech, Beijing Industrial University, China, May, 2008.
  • “The emerging trend of education program for project management,” Master Speech, Beijing Industrial University, China, May 2008.
  • “The emerging trend and development of project management,” Keynote Speaker of the annual meeting of National Project Management Association (NPMA), Taiwan, January 2008, Taiwan.
  • “The emerging trend of project management – project portfolio management,” ConocoPhillips, Anchorage, December 2007.
  • “The application of blue ocean strategy and model simulation,” Top Level Managers Forum, Chang Gung Medical Center, Taiwan, March 2006.
  • “The historical survey of the high-tech development and encouragement strategies for R&D activities in Hsinchu science park of Taiwan,” Hanbat University Forum, South Korean, June 2005.
  • “Six sigma quality management,” Top Level of Quality Managers Forum, Department of Rapid Transit Systems, Taipei City Government , March 2004 (in Chinese).