CE Course Selection


 

Fall Semester 2013

  1. Applied Environ Sci & Tech (AEST)

  2. Course Number Course Name Credits
  3. A601 Aquatic Process Chemistry 3.0
    1. Days Time Location Instructor Open Seats
    2.   T     05:30PM-8:15PM
      ESH 206
      Dotson, A 8

      CRN: 78878
      Section: 601
      Date Range: 08/26-12/08

      An introduction to fundamental aquatic chemistry concepts frequently encountered in environmental science and engineering. An equilibrium approach with an emphasis on treatment process and natural water chemistry is employed. Both a qualitative and quantitative understanding of equilibrium calculations and the ability to apply both graphical and algebraic/numerical solution techniques to chemistry problems.
      Registration Restrictions: Registrants must be enrolled in the AEST, CE, or BIOL graduate programs, or gain instructor approval.

      More Info

    An introduction to fundamental aquatic chemistry concepts frequently encountered in environmental science and engineering. An equilibrium approach with an emphasis on treatment process and natural water chemistry is employed. Both a qualitative and quantitative understanding of equilibrium calculations and the ability to apply both graphical and algebraic/numerical solution techniques to chemistry problems.
    Registration Restrictions: Registrants must be enrolled in the AEST, CE, or BIOL graduate programs, or gain instructor approval.

  4. A602 Water Quality Management 3.0
    1. Days Time Location Instructor Open Seats
    2.  M      05:30PM-8:15PM
      SSB 213
      Olofsson, J 10

      CRN: 78883
      Section: 601
      Date Range: 08/26-12/08

      An assessment of the rationale, concepts, institutions, and engineering aspects of water quality management. Regulatory processes, monitoring strategies and statistics, flow and mixing characteristics, pollutant chemistry, assessment strategies, point and nonpoint source characteristics, the Total Maximum Daily Load (TMDL) process, and mitigation measures are covered.
      Registration Restrictions: Registrants must be enrolled in the AEST, CE, or BIOL graduate programs, or gain instructor approval.

      More Info

    An assessment of the rationale, concepts, institutions, and engineering aspects of water quality management. Regulatory processes, monitoring strategies and statistics, flow and mixing characteristics, pollutant chemistry, assessment strategies, point and nonpoint source characteristics, the Total Maximum Daily Load (TMDL) process, and mitigation measures are covered.
    Registration Restrictions: Registrants must be enrolled in the AEST, CE, or BIOL graduate programs, or gain instructor approval.

  5. A604 Environmentl Law, Regs, Permit 3.0
    1. Days Time Location Instructor Open Seats
    2.    W    05:30PM-8:15PM
      ENGR 342
      Reges, R 9

      CRN: 71572
      Section: 601
      Date Range: 08/26-12/08

      Introductory graduate level course on understanding and navigating environmental laws and regulations. Students will learn the principles of the major environmental laws in the U.S., practice interpreting regulations, and prepare permits.
      Registration Restrictions: Bachelor of Science degree in a science or engineering discipline.

      More Info

    Introductory graduate level course on understanding and navigating environmental laws and regulations. Students will learn the principles of the major environmental laws in the U.S., practice interpreting regulations, and prepare permits.
    Registration Restrictions: Bachelor of Science degree in a science or engineering discipline.

  6. A605 Nat'l Environmental Policy Act 3.0
    1. Days Time Location Instructor Open Seats
    2.   T     05:30PM-8:15PM
      DISTANCE
      Bullington, A 6

      CRN: 71573
      Section: 801
      Date Range: 08/26-12/14

      Examines the National Environmental Policy Act (NEPA) requirements, including process, roles and responsibilities of involved parties, impact analysis, alternative development, stakeholder involvement and environmental conflict resolution. Subject matter experts from State and Federal agencies, industry, environmental nongovernmental organizations and utilities will provide their perspectives on NEPA.
      Registration Restrictions: Bachelor of Science degree in a science or engineering discipline.

      More Info

    Examines the National Environmental Policy Act (NEPA) requirements, including process, roles and responsibilities of involved parties, impact analysis, alternative development, stakeholder involvement and environmental conflict resolution. Subject matter experts from State and Federal agencies, industry, environmental nongovernmental organizations and utilities will provide their perspectives on NEPA.
    Registration Restrictions: Bachelor of Science degree in a science or engineering discipline.

  7. A698 Individual Research 1.0
    1. Days Time Location Instructor Open Seats
    2.        
      Dotson, A 3

      CRN: 71576
      Section: 602
      Date Range: 08/26-12/14

      A course to be designed between the student and faculty member to allow the student the chance to pursue special advanced interests in engineering at the graduate level.
      Registration Restrictions: Registrants must be enrolled in the AEST, CE, or BIOL graduate programs, or gain instructor approval.

      More Info

    A course to be designed between the student and faculty member to allow the student the chance to pursue special advanced interests in engineering at the graduate level.
    Registration Restrictions: Registrants must be enrolled in the AEST, CE, or BIOL graduate programs, or gain instructor approval.

  8. A699 AEST Thesis 1.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Olofsson, J 9

      CRN: 71578
      Section: 602
      Date Range: 08/26-12/14

      Arranged between the advisor and the student. Generally the student has been admitted to candidacy for the master's degree and a thesis committee is formed. The student must take an oral exam defending the thesis.
      Registration Restrictions: Registrants must be enrolled in the AEST graduate program.

      More Info

    3.        
      ARR
      Dotson, A 1

      CRN: 71579
      Section: 801
      Date Range: 08/26-12/14

      Arranged between the advisor and the student. Generally the student has been admitted to candidacy for the master's degree and a thesis committee is formed. The student must take an oral exam defending the thesis.
      Registration Restrictions: Registrants must be enrolled in the AEST graduate program.

      More Info

    Arranged between the advisor and the student. Generally the student has been admitted to candidacy for the master's degree and a thesis committee is formed. The student must take an oral exam defending the thesis.
    Registration Restrictions: Registrants must be enrolled in the AEST graduate program.

  9. Civil Engineering (CE)

  10. Course Number Course Name Credits
  11. A334 Properties of Materials 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    11:30AM-12:20PM
      ENGR 109
      Metzger, A 7

      CRN: 72249
      Section: 601
      Date Range: 08/26-12/14

      Experimental investigation of the properties of civil engineering materials and the basic principles of mechanics. The development of testing procedures, the use of standard testing procedures, and the interpretation of data are also covered. There is a strong emphasis on technical report writing.

      More Info

    Experimental investigation of the properties of civil engineering materials and the basic principles of mechanics. The development of testing procedures, the use of standard testing procedures, and the interpretation of data are also covered. There is a strong emphasis on technical report writing.

  12. A334L Prop of Materials Lab 0.0
    1. Days Time Location Instructor Open Seats
    2.   T     05:30PM-8:15PM
      ENGR 101
      Metzger, A 0

      CRN: 72250
      Section: 601
      Date Range: 08/26-12/14

      More Info

    3.    W    05:30PM-8:15PM
      ENGR 101
      Metzger, A 3

      CRN: 72251
      Section: 602
      Date Range: 08/26-12/14

      More Info

    4.     R   05:30PM-8:15PM
      ENGR 101
      Metzger, A 0

      CRN: 72252
      Section: 603
      Date Range: 08/26-12/14

      More Info

  13. A402 Transportation Engineering 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    02:30PM-3:45PM
      ADM 142
      Bham, G 6

      CRN: 72253
      Section: 601
      Date Range: 08/26-12/08

      Introduction to planning and engineering of transportation systems and their functions, components, and operation. Those systems include highways, airports, railroads, and water transportation with emphasis for highways on planning, geometrical design, traffic operations, and design of pavement structures.

      More Info

    Introduction to planning and engineering of transportation systems and their functions, components, and operation. Those systems include highways, airports, railroads, and water transportation with emphasis for highways on planning, geometrical design, traffic operations, and design of pavement structures.

  14. A403 Arctic Engineering 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Zubeck, H -4

      CRN: 72254
      Section: 851
      Date Range: 08/26-12/14

      Introduces students to a broad spectrum of engineering challenges unique to cold regions. Physical principles and practical data collection methods, analyses, designs, and construction methods are discussed. Students gain a working knowledge of cold regions engineering problems and modern solutions as a basis for more detailed study.
      Registration Restrictions: Junior or senior standing in an accredited undergraduate program in engineering.
      May be stacked with: CE A603

      More Info

    Introduces students to a broad spectrum of engineering challenges unique to cold regions. Physical principles and practical data collection methods, analyses, designs, and construction methods are discussed. Students gain a working knowledge of cold regions engineering problems and modern solutions as a basis for more detailed study.
    Registration Restrictions: Junior or senior standing in an accredited undergraduate program in engineering.
    May be stacked with: CE A603

  15. A406 Transportation Engineering II 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   10:00AM-11:15AM
      ENGR 342
      Abaza, O 21

      CRN: 78780
      Section: 601
      Date Range: 08/26-12/08

      Introduction to planning and engineering of transportation systems and their functions, components and operation. Those systems include highways, airports, railroads and water transportation with emphasis for highways regarding geometrical and pavement design.

      More Info

    Introduction to planning and engineering of transportation systems and their functions, components and operation. Those systems include highways, airports, railroads and water transportation with emphasis for highways regarding geometrical and pavement design.

  16. A414 Soil Strength Slope Stability 3.0
    1. Days Time Location Instructor Open Seats
    2.    W    05:30PM-8:15PM
      ARTS 121
      Yang, Z 2

      CRN: 78885
      Section: 651
      Date Range: 08/26-12/08

      Advanced knowledge of soil shear strength properties; analysis of slope stability, including seismic stability and design of slope stabilization; case histories study and applications to cold regions engineering problems.
      May be stacked with: CE A614
      Registration Restrictions: Senior in Civil Engineering or instructor permission.

      More Info

    Advanced knowledge of soil shear strength properties; analysis of slope stability, including seismic stability and design of slope stabilization; case histories study and applications to cold regions engineering problems.
    May be stacked with: CE A614
    Registration Restrictions: Senior in Civil Engineering or instructor permission.

  17. A422 Foundation Engineering 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    08:30AM-9:45AM
      RH 316
      Yang, Z 1

      CRN: 72255
      Section: 601
      Date Range: 08/26-12/08

      Concepts, principles, and/or procedures related to slope stability, shallow foundations, pile foundations, drilled shafts, lateral earth pressure, retaining walls, sheet pile walls, braced cuts, soil improvement, and reinforced earth structures.

      More Info

    Concepts, principles, and/or procedures related to slope stability, shallow foundations, pile foundations, drilled shafts, lateral earth pressure, retaining walls, sheet pile walls, braced cuts, soil improvement, and reinforced earth structures.

  18. A423 Traffic Engineering 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    05:30PM-6:45PM
      ENGR 228
      Bham, G 8

      CRN: 72256
      Section: 651
      Date Range: 08/26-12/14

      Traffic engineering studies and analyses, traffic flow theory, traffic control systems design, signalization, and capacity analyses.
      May be stacked with: CE A623

      More Info

    Traffic engineering studies and analyses, traffic flow theory, traffic control systems design, signalization, and capacity analyses.
    May be stacked with: CE A623

  19. A432 Steel Design 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      RH 316
      Hamel, S 7

      CRN: 72258
      Section: 601
      Date Range: 08/26-12/08

      Essentials of structural design in steel including building code requirements and standard practice for the design of basic structural elements and connections.

      More Info

    Essentials of structural design in steel including building code requirements and standard practice for the design of basic structural elements and connections.

  20. A437 Project Planning 1.0
    1. Days Time Location Instructor Open Seats
    2.    W    01:00PM-1:50PM
      SSB 213
      Smith, O 13

      CRN: 72259
      Section: 601
      Date Range: 08/26-12/08

      Introduces the basics in civil engineering project planning and analysis. Defines problem statement and develops goals, objectives; generates alternatives and criteria for evaluation and implementation of civil engineering projects.
      Registration Restrictions: Senior standing in Civil Engineering.

      More Info

    Introduces the basics in civil engineering project planning and analysis. Defines problem statement and develops goals, objectives; generates alternatives and criteria for evaluation and implementation of civil engineering projects.
    Registration Restrictions: Senior standing in Civil Engineering.

  21. A441 Fund Envi Engr & App Envi Sci 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   04:00PM-5:15PM
      RH 110
      Dotson, A 33

      CRN: 72260
      Section: 651
      Date Range: 08/26-12/08

      Introduction to the fundamental theory, analysis and regulations of environmental engineering and applied environmental science. Topics include environmental chemistry, drinking water and wastewater treatment, air pollution and solid waste management.
      May be stacked with: CE A641

      More Info

    Introduction to the fundamental theory, analysis and regulations of environmental engineering and applied environmental science. Topics include environmental chemistry, drinking water and wastewater treatment, air pollution and solid waste management.
    May be stacked with: CE A641

  22. A442 Environmental Systems Design 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    11:30AM-12:45PM
      ADM 145
      Olofsson, J 25

      CRN: 72261
      Section: 601
      Date Range: 08/26-12/08

      Design of systems commonly used in environmental engineering practice with an emphasis on water and wastewater treatment. Design of unit processes and operations will be performed for both potable water and wastewater treatment. Selection of system components, design and performance calculations and complete engineering reports are required.

      More Info

    Design of systems commonly used in environmental engineering practice with an emphasis on water and wastewater treatment. Design of unit processes and operations will be performed for both potable water and wastewater treatment. Selection of system components, design and performance calculations and complete engineering reports are required.

  23. A462 Surface Water Dynamics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T     05:30PM-8:15PM
      SSB 224
      Lang, R 13

      CRN: 72262
      Section: 651
      Date Range: 08/26-12/08

      Open channel flow theory including: steady and unsteady flow, water surface profiles and the impact of hydraulic structures; sediment transport under open channel flow.
      May be stacked with: CE A662

      More Info

    Open channel flow theory including: steady and unsteady flow, water surface profiles and the impact of hydraulic structures; sediment transport under open channel flow.
    May be stacked with: CE A662

  24. A603 Arctic Engineering 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Zubeck, H 15

      CRN: 72263
      Section: 851
      Date Range: 08/26-12/14

      Introduces students to a broad spectrum of engineering challenges that are unique to cold regions. Physical principles and practical data collection methods, analyses, designs, and construction methods are discussed. Students gain a working knowledge of cold-region engineering problems and modern solutions as a basis for detailed study.
      Registration Restrictions: Graduate standing with a baccalaureate degree in engineering. No previous credits for CE A403.
      May be stacked with: CE A403

      More Info

    Introduces students to a broad spectrum of engineering challenges that are unique to cold regions. Physical principles and practical data collection methods, analyses, designs, and construction methods are discussed. Students gain a working knowledge of cold-region engineering problems and modern solutions as a basis for detailed study.
    Registration Restrictions: Graduate standing with a baccalaureate degree in engineering. No previous credits for CE A403.
    May be stacked with: CE A403

  25. A614 Soil Strength Slope Stability 3.0
    1. Days Time Location Instructor Open Seats
    2.    W    05:30PM-8:15PM
      ARTS 121
      Yang, Z 7

      CRN: 78886
      Section: 651
      Date Range: 08/26-12/08

      Advanced knowledge of soil shear strength properties; analysis of slope stability, including seismic stability and design of slope stabilization; case histories study and applications to cold regions engineering problems.
      May be stacked with: CE A414
      Registration Restrictions: Graduate standing or instructor permission.

      More Info

    Advanced knowledge of soil shear strength properties; analysis of slope stability, including seismic stability and design of slope stabilization; case histories study and applications to cold regions engineering problems.
    May be stacked with: CE A414
    Registration Restrictions: Graduate standing or instructor permission.

  26. A623 Traffic Engineering 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    05:30PM-6:45PM
      ENGR 228
      Bham, G 6

      CRN: 72265
      Section: 651
      Date Range: 08/26-12/14

      Traffic engineering studies and analyses, traffic flow theory, traffic control systems design, signalization, and capacity analyses.
      May be stacked with: CE A423

      More Info

    Traffic engineering studies and analyses, traffic flow theory, traffic control systems design, signalization, and capacity analyses.
    May be stacked with: CE A423

  27. A639 Loads on Structures 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    04:00PM-5:15PM
      ENGR 342
      Hamel, S 4

      CRN: 81345
      Section: 601
      Date Range: 08/26-12/08

      Covers the computation of loads on structures using ASCE 7, Minimum Design Loads for Buildings and Other Structures. The computation of loads (dead, live, soil, flood, snow, wind, and seismic) and probable combinations of loads will be covered.
      Registration Restrictions: Graduate level or undergraduate senior standing, or instructor approval.

      More Info

    3.  M W    04:00PM-5:15PM
      VDCF
      Hamel, S 9

      CRN: 81344
      Section: 7V1
      Date Range: 08/26-12/14

      Covers the computation of loads on structures using ASCE 7, Minimum Design Loads for Buildings and Other Structures. The computation of loads (dead, live, soil, flood, snow, wind, and seismic) and probable combinations of loads will be covered.
      Registration Restrictions: Graduate level or undergraduate senior standing, or instructor approval.

      More Info

    Covers the computation of loads on structures using ASCE 7, Minimum Design Loads for Buildings and Other Structures. The computation of loads (dead, live, soil, flood, snow, wind, and seismic) and probable combinations of loads will be covered.
    Registration Restrictions: Graduate level or undergraduate senior standing, or instructor approval.

  28. A641 Fund Envi Engr & App Envi Sci 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   04:00PM-5:15PM
      RH 110
      Dotson, A 5

      CRN: 72268
      Section: 651
      Date Range: 08/26-12/08

      Introduction to the fundamental theory, analysis and regulations of environmental engineering and applied environmental science. Topics include environmental chemistry, drinking water and wastewater treatment, air pollution and solid waste management.
      May be stacked with: CE A441
      Registration Restrictions: Graduate standing in Civil Engineering or enrolled in AEST.

      More Info

    Introduction to the fundamental theory, analysis and regulations of environmental engineering and applied environmental science. Topics include environmental chemistry, drinking water and wastewater treatment, air pollution and solid waste management.
    May be stacked with: CE A441
    Registration Restrictions: Graduate standing in Civil Engineering or enrolled in AEST.

  29. A662 Surface Water Dynamics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T     05:30PM-8:15PM
      SSB 224
      Lang, R 3

      CRN: 72269
      Section: 651
      Date Range: 08/26-12/08

      Open channel flow theory including: steady and unsteady flow, water surface profiles and the impact of hydraulic structures; sediment transport under open channel flow.
      May be stacked with: CE A462
      Registration Restrictions: Graduate standing in Civil Engineering.

      More Info

    Open channel flow theory including: steady and unsteady flow, water surface profiles and the impact of hydraulic structures; sediment transport under open channel flow.
    May be stacked with: CE A462
    Registration Restrictions: Graduate standing in Civil Engineering.

  30. A674 Waves Tides Ocean Processes 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Smith, O 0

      CRN: 78879
      Section: 601
      Date Range: 08/26-12/14

      Introduction to the physical properties and behavior of sea water with the ocean basins, and the practice of ocean research and engineering. Introduction to the physical properties and behavior of free surface gravity waves, measurements and characterizations of ocean wave climate, and interactions of ocean waves with structures and natural coastal features.
      Registration Restrictions: Prerequisite and graduate standing, or instructor permission.

      More Info

    Introduction to the physical properties and behavior of sea water with the ocean basins, and the practice of ocean research and engineering. Introduction to the physical properties and behavior of free surface gravity waves, measurements and characterizations of ocean wave climate, and interactions of ocean waves with structures and natural coastal features.
    Registration Restrictions: Prerequisite and graduate standing, or instructor permission.

  31. A675 Design of Ports and Harbors 3.0
    1. Days Time Location Instructor Open Seats
    2.     R   06:00PM-8:45PM
      ESH 216
      Smith, O 13

      CRN: 78882
      Section: 601
      Date Range: 08/26-12/08

      Introduction to planning and design of port and harbor facilities.
      Registration Restrictions: Graduate standing in Engineering or instructor permission.
      May be stacked with: CE A475

      More Info

    Introduction to planning and design of port and harbor facilities.
    Registration Restrictions: Graduate standing in Engineering or instructor permission.
    May be stacked with: CE A475

  32. A681 Frozen Ground Engineerng 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Zubeck, H 10

      CRN: 78884
      Section: 801
      Date Range: 08/26-12/14

      Physical, thermal, and mechanical properties of frozen soils, frost action, heat flow in soils, thaw behavior of frozen ground, foundations in frozen ground, construction ground freezing, pavement design, earthwork, and field investigations for frozen ground.
      Registration Restrictions: Graduate standing, with a baccalaureate degree in engineering, or upper class standing in an accredited undergraduate program in engineering.

      More Info

    Physical, thermal, and mechanical properties of frozen soils, frost action, heat flow in soils, thaw behavior of frozen ground, foundations in frozen ground, construction ground freezing, pavement design, earthwork, and field investigations for frozen ground.
    Registration Restrictions: Graduate standing, with a baccalaureate degree in engineering, or upper class standing in an accredited undergraduate program in engineering.

  33. A683 Arctic Hydro/Hydraulic Engr 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Ravens, T 19

      CRN: 72272
      Section: 801
      Date Range: 08/26-12/14

      Aspects of hydrology and hydraulics unique to engineering problems of the North. Emphasis on Alaskan conditions, information from Canada and other circumpolar countries included.
      Registration Restrictions: Graduate standing, with degree in engineering or physical science, or upper class standing in an accredited undergraduate program in these categories.

      More Info

    Aspects of hydrology and hydraulics unique to engineering problems of the North. Emphasis on Alaskan conditions, information from Canada and other circumpolar countries included.
    Registration Restrictions: Graduate standing, with degree in engineering or physical science, or upper class standing in an accredited undergraduate program in these categories.

  34. A686 Civil Engineering Project 3.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Olofsson, J 4

      CRN: 81346
      Section: 801
      Date Range: 08/26-12/14

      Civil and Arctic Engineering project arranged among the advisor, graduate advisory committee and student to solve a practical engineering problem.
      Registration Restrictions: Graduate standing with a minimum of 9 graduate credits.

      More Info

    Civil and Arctic Engineering project arranged among the advisor, graduate advisory committee and student to solve a practical engineering problem.
    Registration Restrictions: Graduate standing with a minimum of 9 graduate credits.

  35. A698 Individual Research 1.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Yang, Z 10

      CRN: 72275
      Section: 601
      Date Range: 08/26-12/14

      A course to be designed between the student and faculty member to allow students the chance to pursue special advanced interests in engineering at the MS level.
      Registration Restrictions: Faculty permission.

      More Info

    3.        
      ARR
      Ravens, T 10

      CRN: 72276
      Section: 602
      Date Range: 08/26-12/14

      A course to be designed between the student and faculty member to allow students the chance to pursue special advanced interests in engineering at the MS level.
      Registration Restrictions: Faculty permission.

      More Info

    4.        
      ARR
      Dotson, A 10

      CRN: 72277
      Section: 603
      Date Range: 08/26-12/14

      A course to be designed between the student and faculty member to allow students the chance to pursue special advanced interests in engineering at the MS level.
      Registration Restrictions: Faculty permission.

      More Info

    5.        
      ARR
      Bham, G 10

      CRN: 78880
      Section: 604
      Date Range: 08/26-12/14

      A course to be designed between the student and faculty member to allow students the chance to pursue special advanced interests in engineering at the MS level.
      Registration Restrictions: Faculty permission.

      More Info

    6.        
      ARR
      Zubeck, H 4

      CRN: 81296
      Section: 605
      Date Range: 08/26-12/14

      A course to be designed between the student and faculty member to allow students the chance to pursue special advanced interests in engineering at the MS level.
      Registration Restrictions: Faculty permission.

      More Info

    A course to be designed between the student and faculty member to allow students the chance to pursue special advanced interests in engineering at the MS level.
    Registration Restrictions: Faculty permission.

  36. A699 Thesis 1.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Olofsson, J 15

      CRN: 72278
      Section: 601
      Date Range: 08/26-12/14

      Individual study of an advanced engineering problem resulting in a thesis.
      Registration Restrictions: Graduate standing and advisor approval.

      More Info

    3.        
      ARR
      Abaza, O 10

      CRN: 72279
      Section: 602
      Date Range: 08/26-12/14

      Individual study of an advanced engineering problem resulting in a thesis.
      Registration Restrictions: Graduate standing and advisor approval.

      More Info

    4.        
      ARR
      Ravens, T 3

      CRN: 72280
      Section: 603
      Date Range: 08/26-12/14

      Individual study of an advanced engineering problem resulting in a thesis.
      Registration Restrictions: Graduate standing and advisor approval.

      More Info

    5.        
      ARR
      Dotson, A 12

      CRN: 72281
      Section: 604
      Date Range: 08/26-12/14

      Individual study of an advanced engineering problem resulting in a thesis.
      Registration Restrictions: Graduate standing and advisor approval.

      More Info

    6.        
      ARR
      Yang, Z 10

      CRN: 72282
      Section: 605
      Date Range: 08/26-12/14

      Individual study of an advanced engineering problem resulting in a thesis.
      Registration Restrictions: Graduate standing and advisor approval.

      More Info

    7.        
      ARR
      Bham, G 10

      CRN: 78881
      Section: 606
      Date Range: 08/26-12/14

      Individual study of an advanced engineering problem resulting in a thesis.
      Registration Restrictions: Graduate standing and advisor approval.

      More Info

    Individual study of an advanced engineering problem resulting in a thesis.
    Registration Restrictions: Graduate standing and advisor approval.

  37. AC010 CE Seminars & Workshops 2.0
    1. Days Time Location Instructor Open Seats
    2.  M W    07:30PM-9:30PM
      SSB 253
      TBA 27

      CRN: 81240
      Section: 601
      Date Range: 08/26-12/08
      Section Title: Fundamentals of Engr Review

      Civil engineering seminars and workshops. Course may be repeated with variable topics.

      More Info

    Civil engineering seminars and workshops. Course may be repeated with variable topics.

  38. Engineering (ENGR)

  39. Course Number Course Name Credits
  40. A105A Engr Computer-Aided Design I 1.0
    1. Days Time Location Instructor Open Seats
    2.      F  01:30PM-5:20PM
      ENGR 218
      Foster, J 1

      CRN: 73224
      Section: 601
      Date Range: 08/26-09/27

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    3.   T R   05:30PM-7:10PM
      ENGR 218
      Foster, J -1

      CRN: 73225
      Section: 602
      Date Range: 08/26-09/27

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    4.       S 09:00AM-12:30PM
      ENGR 218
      Foster, J 3

      CRN: 81126
      Section: 603
      Date Range: 08/26-09/27

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

      More Info

    Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Orthographic projections, auxiliary views, sectional views, and layer management are explored and implemented in assigned engineering design projects. Part I of a three part series.

  41. A105B Engr Computer-Aided Design II 1.0
    1. Days Time Location Instructor Open Seats
    2.      F  01:30PM-5:20PM
      ENGR 218
      Foster, J 0

      CRN: 73227
      Section: 601
      Date Range: 09/30-11/01

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    3.   T R   05:30PM-7:10PM
      ENGR 218
      Foster, J 0

      CRN: 73228
      Section: 602
      Date Range: 09/30-11/01

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    4.       S 09:00AM-12:30PM
      ENGR 218
      Foster, J 7

      CRN: 81400
      Section: 603
      Date Range: 09/30-11/01

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

      More Info

    Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Object snaps, engineering drawing editing, blocks and external references, multi viewports and views, object linking and embedding, raster image manipulation, and basic 3-D modeling are explored and implemented in assigned engineering design projects. Part II of a three part series.

  42. A105C Engr Computer-Aided Design III 1.0
    1. Days Time Location Instructor Open Seats
    2.      F  01:30PM-5:20PM
      ENGR 218
      Foster, J -2

      CRN: 73230
      Section: 601
      Date Range: 11/04-12/06

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

      More Info

    3.   T R   05:30PM-7:10PM
      ENGR 218
      Foster, J 0

      CRN: 73231
      Section: 602
      Date Range: 11/04-12/06

      Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

      More Info

    Applied engineering design course focusing on engineering graphics concepts using applied Computer-Aided Design (CAD) tools. Surfaces, featured based modeling, solid editing, extraction of orthographic, auxiliary and section views from a 3-D model, printing and plotting are explored and implemented in assigned engineering design projects. Part III of a three part series.

  43. A151 Introduction to Engineering 1.0
    1. Days Time Location Instructor Open Seats
    2.    W    02:30PM-3:20PM
      SSB 213
      Smith, O 2

      CRN: 78888
      Section: 602
      Date Range: 08/26-12/08

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    3.      F  08:30AM-9:20AM
      SSB 213
      Peuker, S 10

      CRN: 80509
      Section: 603
      Date Range: 08/26-12/08

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    4.      F  09:30AM-10:20AM
      SSB 213
      Peuker, S 11

      CRN: 80510
      Section: 604
      Date Range: 08/26-12/08

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    5.      F  10:30AM-11:20AM
      SSB 213
      Peuker, S 2

      CRN: 80511
      Section: 605
      Date Range: 08/26-12/08

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    6.     R   07:00PM-8:00PM
      JKB 108
      Wright Jr, N 2

      CRN: 78969
      Section: P31
      Date Range: 08/26-12/14

      An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

      More Info

    An introduction to engineering, both as a profession and as a field of study. Introduces students to the roles, responsibilities and capabilities of civil, computer systems, electrical and mechanical engineers.

  44. A161 Engineering Practices II 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    01:00PM-2:15PM
      ENGR 109
      Peuker, J 1

      CRN: 73235
      Section: 601
      Date Range: 08/26-12/14

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    3.   T R   08:30AM-9:45AM
      ENGR 109
      Ketner, D 4

      CRN: 73236
      Section: 602
      Date Range: 08/26-12/14

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    4.   T R   02:30PM-3:45PM
      ENGR 218
      Cullin, M 7

      CRN: 73237
      Section: 603
      Date Range: 08/26-12/14

      Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

      More Info

    Presents the basic skills required of engineers for using computers to solve engineering problems and presenting results in a professional form. Application of computation methods and tools for practicing engineering. Introduction to computer programming and engineering problem solving softwares including visual basic in spreadsheets, Matlab, and Mathcad.

  45. A495 Engineering Internship 1.0
    1. Days Time Location Instructor Open Seats
    2.        
      ARR
      Hoffman, J 14

      CRN: 73239
      Section: 601
      Date Range: 08/26-12/14

      Professional work experience designed to provide students with the opportunity to investigate the practical applications of engineering design within engineering organizations. Assignments and projects arranged with cooperating organizations and agencies.
      Registration Restrictions: Instructor permission.

      More Info

    Professional work experience designed to provide students with the opportunity to investigate the practical applications of engineering design within engineering organizations. Assignments and projects arranged with cooperating organizations and agencies.
    Registration Restrictions: Instructor permission.

  46. Engineering Science (ES)

  47. Course Number Course Name Credits
  48. A103 Engineering Graphics 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    05:30PM-8:10PM
      ENGR 218
      Varney, T 0

      CRN: 73247
      Section: 601
      Date Range: 08/26-12/14

      Introduces the fundamentals of engineering graphics and provides training in visualization skills necessary for graphically presenting of engineering ideas using standard drawing techniques and Computer Aided Design (CAD).

      More Info

    Introduces the fundamentals of engineering graphics and provides training in visualization skills necessary for graphically presenting of engineering ideas using standard drawing techniques and Computer Aided Design (CAD).

  49. A208 Engr Statics & Dynamics 5.0
    1. Days Time Location Instructor Open Seats
    2.  M WR   08:00AM-9:40AM
      RH 211
      Cullin, M 30

      CRN: 73251
      Section: 601
      Date Range: 08/26-12/08

      Static and dynamic analysis of particles and rigid bodies. Statics topics covered include Newton's laws of motion, Newton's law of gravitational attraction, force and force systems, equilibrium, structural analysis, internal forces, friction, and center of gravity and centroid. Dynamics topics covered include particle and rigid body kinematics and kinetics, force and acceleration, work and energy, impulse and momentum, and vibrations.

      More Info

    Static and dynamic analysis of particles and rigid bodies. Statics topics covered include Newton's laws of motion, Newton's law of gravitational attraction, force and force systems, equilibrium, structural analysis, internal forces, friction, and center of gravity and centroid. Dynamics topics covered include particle and rigid body kinematics and kinetics, force and acceleration, work and energy, impulse and momentum, and vibrations.

  50. A209 Engineering Statics 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    08:30AM-9:45AM
      RH 220
      Dutta, U 7

      CRN: 73252
      Section: 601
      Date Range: 08/26-12/08

      Principles and analysis of static force systems, equilibrium, distributed forces, centroids, centers of gravity, moments of inertia, structures, friction, and virtual work.

      More Info

    3.   T R   10:00AM-11:15AM
      ESH 209
      Paris, A -1

      CRN: 73253
      Section: 602
      Date Range: 08/26-12/08

      Principles and analysis of static force systems, equilibrium, distributed forces, centroids, centers of gravity, moments of inertia, structures, friction, and virtual work.

      More Info

    Principles and analysis of static force systems, equilibrium, distributed forces, centroids, centers of gravity, moments of inertia, structures, friction, and virtual work.

  51. A210 Engineering Dynamics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      SSB 251
      Dutta, U 2

      CRN: 73254
      Section: 601
      Date Range: 08/26-12/08

      Kinematics and kinetics of particles and rigid bodies with applications of Newton's second law and principles of work-energy, impulse-momentum, and vibration.

      More Info

    Kinematics and kinetics of particles and rigid bodies with applications of Newton's second law and principles of work-energy, impulse-momentum, and vibration.

  52. A302 Engineering Data Analysis 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   04:00PM-5:15PM
      ENGR 218
      Ravens, T 0

      CRN: 73255
      Section: 601
      Date Range: 08/26-12/14

      Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

      More Info

    3.      F  08:30AM-11:15AM
      ENGR 228
      Dutta, U 9

      CRN: 73256
      Section: 602
      Date Range: 08/26-12/14

      Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

      More Info

    4.      F  02:30PM-5:15PM
      ENGR 109
      Kretchik, G -1

      CRN: 81055
      Section: 603
      Date Range: 08/26-12/14

      Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

      More Info

    Analytical and spreadsheet methods appropriate to the solution of engineering problems using the concepts from probability and statistics.

  53. A309 Elements Electrical Engineer 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   08:30AM-9:45AM
      RH 110
      Petersen, T 37

      CRN: 73257
      Section: 601
      Date Range: 08/26-12/08

      Electrical fundamentals: elementary circuit analysis, network theorems, steady state, and transient analysis of DC circuits with resistors and one energy storage device (L or C). Steady state analysis of AC circuits with resistors, capacitors, and inductors using complex number and phasor representation. Power in DC and AC circuits. Transformers, meters, and applications of simple electrical components and circuits.

      More Info

    Electrical fundamentals: elementary circuit analysis, network theorems, steady state, and transient analysis of DC circuits with resistors and one energy storage device (L or C). Steady state analysis of AC circuits with resistors, capacitors, and inductors using complex number and phasor representation. Power in DC and AC circuits. Transformers, meters, and applications of simple electrical components and circuits.

  54. A331 Mechanics of Materials 3.0
    1. Days Time Location Instructor Open Seats
    2.  M W    04:00PM-5:15PM
      RH 110
      Liu, H 13

      CRN: 73258
      Section: 601
      Date Range: 08/26-12/08

      Stress-strain relations, axially loaded and torsional members, review of shear and bending moment diagrams for beams, flexural and shearing stresses, deflections of beams, plane stress, combined stresses, buckling of columns, elementary design of beams and columns.

      More Info

    3.  M W    04:00PM-5:15PM
      SSB 224
      Metzger, A -1

      CRN: 81056
      Section: 602
      Date Range: 08/26-12/08

      Stress-strain relations, axially loaded and torsional members, review of shear and bending moment diagrams for beams, flexural and shearing stresses, deflections of beams, plane stress, combined stresses, buckling of columns, elementary design of beams and columns.

      More Info

    Stress-strain relations, axially loaded and torsional members, review of shear and bending moment diagrams for beams, flexural and shearing stresses, deflections of beams, plane stress, combined stresses, buckling of columns, elementary design of beams and columns.

  55. A341 Fluid Mechanics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   10:00AM-11:15AM
      RH 110
      Lu, G 20

      CRN: 73259
      Section: 601
      Date Range: 08/26-12/08

      Introduction to physical properties and behavior of fluids. Topics include hydrostatics and dynamics of liquids and gases, dimensional analysis, fluid forces on immersed bodies, pipe flow, fluid machinery, and open channel flow.

      More Info

    Introduction to physical properties and behavior of fluids. Topics include hydrostatics and dynamics of liquids and gases, dimensional analysis, fluid forces on immersed bodies, pipe flow, fluid machinery, and open channel flow.

  56. A341L Fluid Mechanics Laboratory 1.0
    1. Days Time Location Instructor Open Seats
    2.  M      01:00PM-3:45PM
      ENGR 104
      Lu, G 5

      CRN: 73260
      Section: 601
      Date Range: 08/26-12/14

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    3.    W    01:00PM-3:45PM
      ENGR 104
      Lu, G 0

      CRN: 73261
      Section: 602
      Date Range: 08/26-12/14

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    4.   T     06:00PM-8:45PM
      ENGR 104
      Lu, G 5

      CRN: 73262
      Section: 603
      Date Range: 08/26-12/14

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    5.     R   01:00PM-3:45PM
      ENGR 104
      Lu, G 0

      CRN: 73263
      Section: 604
      Date Range: 08/26-12/14

      Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

      More Info

    Provides supplemental explanation and practical exercises applying physical properties and behavior of fluids, including hydrostatics, fluid forces, pipe flow, fluid machinery, and open channel flow.

  57. A346 Basic Thermodynamics 3.0
    1. Days Time Location Instructor Open Seats
    2.   T R   02:30PM-3:45PM
      AHS 106
      Brock, J 14

      CRN: 73264
      Section: 601
      Date Range: 08/26-12/08

      Thermodynamics systems, properties, processes, and cycles. Fundamental principles of thermodynamics (first and second laws), and elementary applications.

      More Info

    Thermodynamics systems, properties, processes, and cycles. Fundamental principles of thermodynamics (first and second laws), and elementary applications.

  58. A411 Northern Design 3.0
    1. Days Time Location Instructor Open Seats
    2.    W    07:00PM-9:45PM
      RH 117
      Abaza, O 44

      CRN: 73265
      Section: 601
      Date Range: 08/26-12/08

      Introduction to design and maintenance of facilities in northern climates to construct sustainable, energy-efficient and durable buildings and infrastructure suitable for the unique needs of northern inhabitants.
      Registration Restrictions: Senior standing or graduate standing in an accredited program in architecture or engineering, or instructor permission.

      More Info

    3.    W    07:00PM-9:45PM
      RH 117
      Adams Jr., W 44

      CRN: 73265
      Section: 601
      Date Range: 08/26-12/08

      Introduction to design and maintenance of facilities in northern climates to construct sustainable, energy-efficient and durable buildings and infrastructure suitable for the unique needs of northern inhabitants.
      Registration Restrictions: Senior standing or graduate standing in an accredited program in architecture or engineering, or instructor permission.

      More Info

    Introduction to design and maintenance of facilities in northern climates to construct sustainable, energy-efficient and durable buildings and infrastructure suitable for the unique needs of northern inhabitants.
    Registration Restrictions: Senior standing or graduate standing in an accredited program in architecture or engineering, or instructor permission.

  59. AC030 Fund of Arctic Engineering 4.5
    1. Days Time Location Instructor Open Seats
    2.        
      DISTANCE
      Zubeck, H 32

      CRN: 78889
      Section: 801
      Date Range: 10/14-10/24

      Introduces students to a broad spectrum of engineering challenges that are unique to cold regions of the world. Physical principles and practical data collection, analysis, design, and construction methods are discussed. Students gain a working knowledge of cold regions engineering problems and modern solutions.
      Registration Restrictions: Degree in engineering, architecture, landscape architecture, geomatics, or physical science, upper class standing in an undergraduate program in these categories, or instructor permission.

      More Info

    Introduces students to a broad spectrum of engineering challenges that are unique to cold regions of the world. Physical principles and practical data collection, analysis, design, and construction methods are discussed. Students gain a working knowledge of cold regions engineering problems and modern solutions.
    Registration Restrictions: Degree in engineering, architecture, landscape architecture, geomatics, or physical science, upper class standing in an undergraduate program in these categories, or instructor permission.